Disclaimers

LUXE® by Alvic Product Disclaimer

The technical specifications and data provided for LUXE panels are based on standardized testing conditions and are intended as a general reference only. Actual performance may vary depending on application, installation, environmental conditions, and handling practices.

LUXE panels are designed for use as non-work surfaces (vertical applications) and are not certified for use as worktops or horizontal load-bearing surfaces. It is the sole responsibility of the purchaser, transformer, assembler, and/or end user to verify the suitability of this product for their specific intended use and installation.

Surface Defect Evaluation

Surface defects are assessed under controlled conditions: viewed from a distance of 70 cm (27.6 in), with the panel in a vertical position simulating real installation conditions, under diffused white fluorescent lighting, and observed for a maximum of 20 seconds. Only defects larger than 1 mm² (0.0016 in²) visible under these conditions are considered admissible defects. Any imperfection within the outermost centimeter (0.4 in) around the perimeter of the board is not considered a defect, as this area is intended to be discarded during processing.

Quality Standard

Panels are supplied under the following conditions: 70% of panels are guaranteed flawless, while the remaining 30% may contain a maximum of 3 defects each, which are marked for easy identification. Alvic Group is committed to transparent quality standards, and any defects present will be clearly indicated upon delivery.

Product characteristics — including coating qualities and color — may vary slightly between production batches. Colors shown on screen or in print may not accurately represent the final product.

This information does not constitute a warranty of any kind. Alvic Group reserves the right to modify product specifications at any time without prior notice.